71 lines
2.4 KiB
C
71 lines
2.4 KiB
C
/*******************************************************************************
|
|
* @note Copyright (C) 2017 Shanghai Panchip Microelectronics Co., Ltd.
|
|
* All rights reserved.
|
|
*
|
|
* @file drv_spi.c
|
|
* @brief SPI?y?ˉ
|
|
*
|
|
* @history - V1.0, 2017-03-06, xiaoguolin, first implementation.
|
|
*******************************************************************************/
|
|
#include "lib_driver_rfspi_pan159.h"
|
|
|
|
/*******************************************************************************
|
|
* @brief SPI初始化
|
|
* @param[in] 无
|
|
* @param[out] 无
|
|
* @return 无
|
|
******************************************************************************/
|
|
void rfspi_pan159_init(void)
|
|
{
|
|
SYS->P0_MFP |= SYS_MFP_P01_GPIO; // P01->RF_CSN
|
|
SYS->P0_MFP |= SYS_MFP_P07_SPI0_CLK|SYS_MFP_P05_SPI0_MOSI|SYS_MFP_P06_SPI0_MISO ;
|
|
SYS->P5_MFP |= SYS_MFP_P52_GPIO; //P20->RF_IRQ
|
|
|
|
CLK_EnableModuleClock(SPI0_MODULE);//使能SPI时钟
|
|
CLK_SetModuleClock(SPI0_MODULE,CLK_CLKSEL1_SPISEL_HCLK,1);//时钟1分频
|
|
|
|
GPIO_SetMode(P0, BIT1, GPIO_MODE_OUTPUT); //RF_CSN
|
|
GPIO_SetMode(P5, BIT2, GPIO_MODE_INPUT); //RF_IRQ
|
|
|
|
SYS->P0_MFP |= SYS_MFP_P05_SPI0_MOSI | SYS_MFP_P06_SPI0_MISO | SYS_MFP_P07_SPI0_CLK;//设置IO复用功能
|
|
SPI_Open(SPI0, SPI_MASTER, SPI_MODE_0,8,2000000);//主设备，模式0,8位宽度，2M速率
|
|
SPI_DisableAutoSS(SPI0);//禁止硬件SS脚
|
|
SPI_WRITE_TX(SPI0, 0);//清除SPI数据
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* @brief SPI字节读写
|
|
* @param[in] dat - 待写入数据
|
|
* @param[out] 无
|
|
* @return 读取到的字节
|
|
******************************************************************************/
|
|
uint8_t rfspi_pan159_rwc(uint8_t dat)
|
|
{
|
|
SPI_WRITE_TX(SPI0, dat);
|
|
SPI_TRIGGER(SPI0);
|
|
while(SPI_IS_BUSY(SPI0));
|
|
return SPI0->RX;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* @brief SPI读写数据块
|
|
* @param[in] p_dat - 数据指针
|
|
* len - 数据长度
|
|
* @param[out] 无
|
|
* @return 读取到的数据块，与p_dat共缓冲区
|
|
* @history - V1.0, 2017-03-06, xiaoguolin, first implementation.
|
|
******************************************************************************/
|
|
uint8_t* rfspi_pan159_rws(uint8_t* p_dat, uint16_t len)
|
|
{
|
|
uint8_t i = 0;
|
|
while(i < len)
|
|
{
|
|
SPI_WRITE_TX(SPI0, p_dat[i]);
|
|
SPI_TRIGGER(SPI0);
|
|
while(SPI_IS_BUSY(SPI0));
|
|
p_dat[i] = SPI0->RX;
|
|
i++;
|
|
}
|
|
return p_dat;
|
|
}
|